Device Control

Device Status

Checking connection...

Last Seen: -

Device Commands

Force Restart

Restarts device in 10 seconds

Factory Reset

Restore factory defaults

Clear History

Clear stored blind spot data

Seal Control

Seal Device

Lock the device seal

Unseal Device

Unlock the device seal

GPS / Positioning Control

Control the satellite positioning module. Disabling GPS forces the device to use LBS (cell tower) and WiFi positioning instead.

Enable GPS

Satellite positioning (default, ~10m accuracy)

Disable GPS

Force LBS/WiFi positioning

Position Source Priority:
GPS (~10m) → LBS Cell Tower (~100-1000m) → WiFi (~15-40m)

Parameter 0x18: 0x01 = GPS enabled (default), 0x00 = GPS disabled

GPS Quality Settings (PDOP)

Current PDOP Threshold
-
Not queried yet
GPS Module Status
-
Query device for status
Satellites in View
-
From latest location

Lower = better GPS quality required (Range: 1.0 - 25.0)

What is PDOP?

PDOP (Position Dilution of Precision) measures GPS positioning quality based on satellite geometry. Lower values indicate better precision.

1-2 Ideal
2-5 Excellent
5-10 Good
>10 Moderate

Parameter 0x17: WORD type, 10x magnification (e.g., 6.5 stored as 65)

Command History

Command Status Device Response
Loading...